Click to enlarge

VERY GOOD QUALITY !!!!!!!!

AFTERMARKET HORN BUTTON FOR CT70KO MODEL'S AND OTHERS .

COMES WITH 1 NEW SCREW ALREADY ==================================== THIS WILL FIT ON ANY OF THE CT70 OR Z50 HANDLEBARS THAT HAD THE HOLE FOR A SWITCH, SO IT CAN MAKE A NEAT STARTER BUTTON OR KILL SWITCH BUTTON ,, FOR THOSE OF YOU THAT LIKE TO MAKE ENGINE SWAP MODS. IT JUST GROUNDS THE ONE WIRE TO FRAME WHEN YOU PUSH THE BUTTON IN.

@ e CT70K0_HORN_BUTTON GRAY_24"_WIRE Z50A KILL BUTTON (76N) (S1392) 76N (S1392)

@ GREY/SILVER TUBING/CONDUIT 5MM_ID_OR_7MM (SOLD_PER_FOOT) @ GREY/SILVER TUBING/CONDUIT 5MM_ID_OR_7MM (SOLD_PER_FOOT) PICK_SIZE 5MM_ID_S1045 7MM_ID_S1046

AS A RULE 5MM IS FOR 1 TO 2 WIRES AND 7MM IS FOR 3 TO 4 WIRES

THIS WILL BE IN ONE PEICE SO IF YOU ORDER 5 YOU WILL GET ONE 5 FOOT CHUNK

5MM/CONDUIT/7MMPICK_SIZE: 
@ *SCREW 3_X_12_MM (SOME_PETCOCKS) (SOME_SWITCHES) (SOLD_EACH) 93500-03012-0A 1/22A (B156E) @ *SCREW 3_X_12_MM (SOME_PETCOCKS) (SOME_SWITCHES) (SOLD_EACH) 93500-03012-0A 1/22A (B156E)
B156E