   ATC90'S WITH A ENGINE SERIAL NUMBER LARGER THAN 1113934OLDER ATC90'S OR CT90'S NEED TO ALSO GET THE ALL ROUND COPPER HEAD GASKET LISTED BELOW THIS SET HAS ONLY ONE VALVE GUIDE SEAL BUT MOST MODELS ONLY HAD ONE ON THE EXHAUST GUIDE ST90'S HAD 2 GUIDE SEALS THIS IS A TOP END GASKET SET FOR ALL CT90'S ATC90'S, AND (ATC110'S 79 AND 80) BUT!!!!!! IF YOU HAVE A (CT90K0 THRU K4) OR A ATC90 WITH A ENGINE SERIAL NUMBER LESS THAN 1113934, OR ANY CL/SL/S90/CM91, THE HEAD GASKET IN THIS KIT WON'T WORK, IF YOU WANT A NEW HEAD GASKET, YOU WILL HAVE TO BUY OUR NUMBER 77R OR CT9G10,, SORRY AND THANKS |
|
 @ *HEAD_GASKET CT90K0_to_K4 (ATC90_F/N_TO_1113934) ALL_S/SL/CL90'S ALL_CM91 12251-028-030 1/20M (R2192)THIS IS THE ALL ROUND HEAD GASKET THAT THE CT90K0 THRU K4 TOOK AND THE EARLY ATC90'S THE NEWER CT'S AND ATC'S HAVE THREE NOTCHES IN THE HEAD GASKETS.THE ALL ROUND HEAD GASKET WORKS FOR (CT90K0 THRU K4) OR AN ATC90 WITH A ENGINE SERIAL NUMBER SMALLER THAN 1113934 |
|
|
 @ HEAD_GASKET CT90K0_to_K4 (ATC90_F/N_TO_1113934) ALL_S/SL/CL90'S ALL_CM91 (CT9G10) temp out of stockID = 51.0MM OD = 64.0MM |
|
|
 @ BIG_BORE_HEADGASKET OLD TYPE 90CC HEAD GASKET (NO_KNOTCHES) COPPER HEAD GASKET 54.60MM ID 64.60MM OD .032" THICK (313i) SEE 335T FITS :ALL S90 CM91 CL90 SL90 CT90K0 TO CT90K4 ATC90'S WITH A ENGINE SERIAL NUMBER'S SMALLER THAN 1113934 OR ABOUT 1971 AND OLDER |
|
|
 @ VALVE GUIDE SEAL 50/70/90'S ATC/TRX70'S ATC110's_TO_85 1/21M (B22H)FITS ALL Z50'S THRU 1987,, 1982 TO 1987 TOOK 2 EACH, OLDER JUST ONE.ATC70'S 1981 AND OLDER TOOK ONLY ONE GUIDE SEAL. 82 AND NEWER TOOK 2 THESE SEALS WILL WORK ON ALL THRU 83. SOME OF THE NEWER YEARS TOOK 2. BUT MOST OF THE OLDER ONES ONLY HAD 1 ON THE EXHAUST VALVE. THESE WILL ALSO FIT ALL ATC90'S AND 110'S THRU 1985 ALL C70 PASSPORTS TOOK 2 EA OF THESE SEALS |
|