-------------------------------------------------------------------------------- THIS IS A HIGH QUALITY BRAND NEW AFTERMARKET CARB !! -------------------------------------------------------------------------------- THIS CARB COMES WITH MAIN JET 140 & IDLE JET 60 INSTALLED... THE POWER JET IS A NUMBER 35 OR 40 JET SIZE -------------------------------------------------------------------------------- THIS CARB TAKES OEM KEIHIN MAIN JET SERIES (99101-393-xxx0)(SEE_BELOW) AND PILOT JET SERIES (N424-21-xxx) MOST HONDA SHOPS CARRY THEM (SEE_LAST_PIC) -------------------------------------------------------------------------------- THE FRONT SPICKET OPENING IS 28MM ID THIS HAS A 34MM OD FRONT SPICKET,,, REAR OF CARB IS 50MM,,, LENGTH FRONT TO REAR IS 83MM,,, -------------------------------------------------------------------------------- NOW YOUR THINKING WHY SO CHEAP? RIGHT ? WELL THERE IS ONE SMALL PROBLEM WITH THIS CARB, THE JETS ARE NOT MARKED WITH A SIZE. BUT I HAVE VERIFIED THE SIZES ARE WHAT IS ADVERTISED THRU AN ELIMINATION PROCESS WITH NEW JETS AND A STOCK HONDA JET SIZING/CLEANER TOOL. SO WHATS STOPPING YOU?? BUY BUY BUY !! |
|
|
|
|
|
|
|
| THIS WILL BOLT UP TO ANY HONDA 50 OR 70 HEAD. IT KEEPS THE STOCK 50 AND 70 MANIFOLD BOLT PATTERN/SPACING. TRX90'S,, THIS WORKS JUST THE SAME AS LISTED ABOVE MODELS |
|
|
| THIS BOLTS TO 50 AND 70 HEADS (TRX90 LIFAN ZONGSHEN ALSO) READ THE FOLLOWING CLOSE: IT HAS A 28MM OPENING AT THE CARB END OF THE ALUMINUM,, WITH A 34 TO 35MM ID RUBBER ADAPTOR,,, AND THEN GOES DOWN TO A 25MM ID AT THE HEAD END OF THE ALUMINUM PIPE THAT BOLTS TO THE HEAD'S INTAKE PORT. 410-1083028 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|