Click to enlarge

PLEASE TAKE NOTE:

BECAUSE OF THE 428_CHAIN AND SMALL DIAMETER OF THE #13 TOOTH SPROCKET

 YOU MUST USE A Z50 LOCK PLATE AND BOLTS FOR CLEARANCE (OUR_9F_&_9G) (SEE_BELOW)

THE 14 16 AND 17 TOOTH USES THE STOCK HONDA 70 OR LIFAN PLATE (OUR_24K_OR_293E)

THIS FRONT SPK. FITS A 17MM OD COUNTERSHAFT

THESE WILL FIT THE NON ELECTRIC START LIFAN 120CC ENGINES THAT HAVE A 55.5 STROKE AND 52.4 BORE,

THESE ALSO WORK ON THE LIFAN 150CC KICK ONLY ENGINES

WHICH IS ALL THE 120CC KICK START ONLY LIFAN'S AT THIS TIME I THINK

FITS A 17MM OD SHAFT

13T 208S / 14T 218T / 16T 313B / 17T 313A

@ LIFAN_110CC LIFAN_120CC LIFAN_128CC LIFAN_138CC LIFAN_140CC LIFAN_150CC ZONGSHEN_120CC 13/14_TOOTH DRIVE_SPROCKET 428_CHAIN 208S or 218TPICK_TOOTH_COUNT_HERE: 

@ *BOLT FRONT SPROCKET LOCK PLATE FITS Z50'S (81_AND_OLDER) ATC185/200 AND MANY OTHER HONDA'S (SOLD_EACH) 90084-041-000 1/21M (R2006)@ *BOLT FRONT SPROCKET LOCK PLATE FITS Z50'S (81_AND_OLDER) ATC185/200 AND MANY OTHER HONDA'S (SOLD_EACH) 90084-041-000 1/21M (R2006)THIS ROUND SHOLDERED BOLT IS SPECIALY MADE TO HOLD ON THE FRONT 12 TOOTH SPROCKET WITHOUT THE CHAIN HITTING ON IT. THESE ARE ONLY NEEDED ON OUR 9A Z50 12 TOOTH FRONT SPROCKET WITH OUR 9G LOCKING PLATE.

R2006
@ SPROCKET_RETAINER  LIFAN_50/70/90'S 110/120/140/150'S (30MM_SPACING) (17MM_OD_SHAFT) (SOLD_EACH) (293E) @ SPROCKET_RETAINER LIFAN_50/70/90'S 110/120/140/150'S (30MM_SPACING) (17MM_OD_SHAFT) (SOLD_EACH) (293E) SAME AS OUR R2026 OEM PLATE AND (ALL_C70'S) (ALL_PASSPORTS)

293E
@ *SPROCKET RETAINER PLATE FRONT Z50'S 1968_TO_1981 23802-045-670 7/20M (R2007)@ *SPROCKET RETAINER PLATE FRONT Z50'S 1968_TO_1981 23802-045-670 7/20M (R2007)THIS LITTLE PLATE HOLDS ON THE FRONT SPROCKET TO THE OUTPUT/COUNTERSHAFT. IT TAKES TWO SPECIAL SHOLDERED BOLTS SOLD SEPERATLY. THIS PLATE IS ONLY FOR THE 9A 12 TOOTH Z50 FRONT SPROCKET.

R2007